|
The Merrill–Crowe Process is a separation technique for removing gold from a cyanide solution. The solution is separated from the ore by methods such as filtration (e.g. horizontal leaf type clarifiers) and counter current decantation (CCD). Afterwards a very clear solution is achieved by using pre-coated filters applying diatomaceous earth. Oxygen is then removed by passing the solution through a vacuum de-aeration column. Zinc dust is added to the clarified, de-aerated solution which precipitates the gold; zinc having a higher affinity for the cyanide ion than gold. Other precious metals, silver, and base metals, like copper, will also precipitate, if present.〔(''The Merrill Crowe Recovery Process, Denver Mineral Engineers Inc.'' )〕 〔(【引用サイトリンク】title=Gold Extraction and Recovery Process )〕 The gold precipitate (mixed with zinc dust) is then filtered out of the solution, and the zinc dust and gold are mixed with sulfuric acid to dissolve the zinc. The solution is filtered, and the remaining solids are smelted to a gold bullion bar. These bars are sent to a refinery to remove the copper and silver, the specific process used depending upon the impurities in the gold.〔(Gold Avenue Encyclopaedia, A-Z Glossary )〕 The basic process was discovered and patented by Charles Washington Merrill around 1900, and later refined by Thomas B. Crowe, working for the Merrill Company. 〔Ryder, David Warren, The Merrill story : (being a record of the life and achievements of Charles Washington Merrill, and a history of the Merrill Company and subsidiaries), Merrill Co., 1958.〕 ==See also== * Other gold cyanidation techniques: * *Carbon in pulp * *Electrowinning 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Merrill–Crowe process」の詳細全文を読む スポンサード リンク
|